High temperature resistant telescopic ducts can be bent arbitrarily, high temperature resistant, wear-resistant universal fans

by:Haikuo     2021-06-09
High temperature resistant vent pipe is a kind of high temperature resistant telescopic air pipe that can be bent at will, without hard elbows, which can reduce wind resistance. The external spiral galvanized steel wire is wear-resistant, flame retardant and meets DIN4102-B1. It is very tough and has a bending radius. Approximately equal to the outer diameter, retractable, patented CP structure, the pipe wall has a reinforced hot-dip galvanized steel strip metal ring, the sealing layer is heat-insulating fiber, and the outer layer is protected by a strong steel ring, which can be dragged on the ground at will. Worn air ducts. In addition, it can withstand the heavy pressure of objects, fireproof, waterproof, acid and alkali, and is very suitable for hot gas extraction in high-temperature boilers, automobile exhaust emissions, factory solder smoke extraction, blast heater exhaust and welding gas exhaust, for exhaust Gas equipment, engine structure, heating engine, solids such as dust, dust and fibers, gas environment such as steam and smoke, dust removal plant, heater exhaust, aircraft equipment and military reconciliation bellows and compressors, low-pressure environment. It can be used for long-term high-temperature ventilation operations in various high-temperature and high-pressure harsh environments.
  High temperature resistant telescopic air duct can withstand 400°C high temperature high performance high temperature resistant exhaust air duct, surface is concave and convex, wear-resistant, light weight, high flexibility, easy to install and use, excellent wear resistance Damage protection, with reinforced metal wire and narrow tilt at the bottom, smooth interior to optimize flow characteristics, light weight and flexibility, high pressure resistance, high vacuum and compression, high axial strength and high tensile strength.

  ◆. Structure: Patented CP structure (CP is the abbreviation of clamp profile), special glass fiber coating, external spiral, galvanized steel clip (steel sheet with anti-wear plastic); Patent number: ZL201130194610.7
  ◆. Performance: good vacuum characteristics, the external spiral galvanized sheet has very good wear resistance, dragging on the ground will not damage the air duct, flexible, arbitrary expansion and bending, flame retardant, insulation, high temperature resistance , Anti-vibration, strong toughness and chemical resistance.
  ◆. Production diameter: 1 inch -50 inch, the bending radius is about larger than the radius, the expansion ratio: 5:1;
  ◆. Color: outer gray/inner white/galvanized steel sheet;
  ◆. Length: 10 meters, can be requested: special color, special length, can be customized;
  ◆. Temperature range: about -60 °C to +400 °C, can reach +450 °C in a short time
  ◆.Application range: used for diesel engine test bench, exhaust of automobile exhaust, high temperature boiler gas extraction, used for exhaust equipment, engine structure, heating engine, solid such as dust, powder and fiber, gas environment such as steam Smoke, dust removal and extraction plant, heater exhaust, aircraft equipment and military coordination bellows and compressors, low-pressure environments, such as construction machinery, coal mines.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...