How to choose industrial vacuum hose with wall thickness of 1.5mm, 0.9mm, 0.6mm

by:Haikuo     2021-06-16
How to choose industrial vacuum hose with wall thickness of 1.5mm, 0.9mm, 0.6mm
  Industrial vacuum cleaners mainly rely on industrial vacuum tubes to suck and transport dust. Then, what types of industrial wear-resistant vacuum hoses are used for industrial vacuum cleaners? PU steel wire vacuum hoses have Wall thickness 1.5mm, wall thickness 0.9mm, wall thickness 0.6mm and other types. Mainly used in the suction, discharge and transportation of powder, wood shavings, wood chips, steam and road shot blasting machines, heavy industrial materials and abrasive materials. Especially suitable for abrasive solids such as dust, powder, fiber, debris and granular; used for gaseous and liquid media, industrial dust removal and suction, industrial vacuum cleaner, paper or fabric fiber suction, as an anti-wear protection tube .

  How to choose a suitable industrial vacuum hose?
  Select the applicable thickness according to the conveying medium. The above three models have the same performance except for the different tube wall thickness. The choice of the applicable thickness depends on the medium to be conveyed. For example, for fine powders, the tube wall is relatively thin, the particles are relatively large, and the friction is strong. The tube wall is thicker, and at the same time, the tube with low pressure resistance is thinner and pressure resistant. The taller one has a thicker wall.
   gives an example of how to choose an applicable industrial vacuum hose:
  1. The ventilation and dust removal hose selected for woodworking machinery, furniture, and woodworking engraving machines usually adopts a thin tube wall thickness. Due to frequent swings, the 0.6mm wall thickness PU steel wire telescopic tube is usually selected for woodworking dust collection hose.
  2. PCB drilling machines usually use PU steel wire suction hoses with a wall thickness of 0.9mm. Most of the original drilling machine suction hoses use this type.
  3. Printing machinery ventilation and dust suction hoses generally use wear-resistant steel wire hoses with a tube wall thickness of 1.5mm. Since the wind pressure of printing machinery is relatively large during ventilation, it must be thicker, otherwise it will withstand pressure. Not up to the requirements.
  Industrial wear-resistant vacuum hose is mainly used to support the entire vacuum system, such as the central vacuum system, etc., such as some woodworking, furniture and other manufacturers use the most, the central vacuum system supporting industrial vacuum hose After being sucked by a vacuum cleaner, this kind of ventilation and dust suction hose is mainly made of polyurethane steel wire hose, which is the most used.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...