How to connect the PU steel wire hose when the length is not enough?
PU steel wire hose is pressure-resistant, wear-resistant, light-weight, environmentally friendly, high-quality steel wire hose, durable, is a multi-purpose industrial wear-resistant dust suction hose, this structure makes the hose has a strong resistance Pressure wear resistance. It has the properties of tensile resistance, strong tension, high tear strength, bending resistance, penetration resistance, low temperature resistance, hydrolysis resistance, etc., and has good resilience and long service life. Highly resistant to abrasion, more than 10 times more wear-resistant than ordinary PVC dust suction hoses and rubber hoses. It is especially suitable for the transportation of dust, powder, fibers, debris and particles. It can withstand high flow rates and very abrasive sand and debris. The friction of the stone will not damage the hose.
Due to the limitation of the PU steel wire hose in the production process, the general domestic production standard is 10 meters, 15 meters and 20 meters, and the longest is not more than 20 meters, especially for some large-diameter PU steel wire hoses. About meters long. Due to the limited length of the cooling water tank during production, the maximum length cannot exceed 20 meters. Moreover, when the customer uses it occasionally, the length will exceed 20 meters. At this time, the hose must be connected to the hose. In this case, a relatively short hard tube is generally used to cover both ends of a PU steel wire tube and then locked with a hose clamp. When encountering some special high-demand use conditions, it may be that ordinary hard pipes cannot meet the requirements and must be connected with stainless steel joints.