Introduction to the performance and application of a steel wire hose developed by a high wear-resistant polyurethane material
Polyurethane is favored by people for its excellent performance. Polyurethane hose uses a special pipe wall material, a high-performance wear-resistant suction soft with a copper-plated steel wire reinforcement with a PU coating. The steel wire hose produced with this material has the following advantages:
Polyurethane steel wire hose has a permanent and effective conductivity of <109Ω, and its transparent surface, through which the material conveyed in the pipe can be seen. Polyurethane steel wire hose, reinforced with spiral-shaped copper-plated steel wire, is halogen-free, and the spiral steel wire can be grounded to discharge static electricity. It meets the static discharge standard of TRB 3 2153. The steel wire is also covered with a layer of PU. The wall thickness ranges from 0.4 to 0.9 mm. Very light and soft, with a stretch ratio of up to 5:1. It is easy to take care of, easy to transport and can save storage space. Strong wear resistance, especially suitable for the dynamic position of machinery and equipment; very suitable for the transmission and suction of particles, scraps, and abrasive powders. Such as powder conveying and dust suction in the woodworking and ceramic industries, road sweepers, weeders and leaves collection and discharge, and cutting and conveying.
Polyurethane steel wire hose has good mineral oil resistance and chemical resistance, good UV and ozone resistance and low temperature flexibility; small bending radius, not easy to kink, no softener and halogen; no gas and liquid leakage , Flame retardant meets UL94-HB standard, meets RoHS regulations, and can discharge static electricity through spiral wire grounding.
Material: Pipe wall: special polyether-polyurethane Pre-PUR, spiral wire: elastic steel wire;
Range of rotation: about -40°C to +125°C, and it can reach +160°C in a short time.