Quick connector manufacturers are trustworthy

by:Haikuo     2021-06-14

Hydraulic quick coupling is a tool that can be realized without tools The joints for quick connection or disconnection of pipelines have four main structural forms: straight-through, single-enclosed, double-enclosed, and safe and non-leakage type. The materials are mainly carbon steel, stainless steel and brass.

Straight-through type: Since there is no one-way valve in this connection system, the flow can be achieved while avoiding the flow change caused by the valve. When the medium is fluid, such as water, the straight-through quick-change coupling is the ideal choice. When disconnecting, the intermediate fluid transfer must be stopped beforehand.

Save time and effort: Disconnect and connect the oil circuit through the quick connector, simple action, save time and manpower.

●Fuel saving: When the oil circuit is broken, the single valve on the quick connector can close the oil circuit so that the oil will not flow out and avoid the loss of oil and oil pressure.

●Space-saving: Various types to meet any pipe layout needs.

●Environmental protection: When the quick connector is disconnected and connected, the oil will not spill and protect the environment.

●Equipment is divided into parts for easy transportation: large equipment or hydraulic tools that need to be easily carried, use quick connectors to disassemble and transport, and then assemble and use after reaching the destination .

●Economy: All the above advantages create economic value for customers.

< /p>

Commonly used scenes of automobile quick joints: communication equipment manufacturing; railway transportation equipment repair; non-metallic mining and dressing not listed ; Electrical signal equipment manufacturing; spacecraft manufacturing; computer manufacturing; poultry slaughter; container manufacturing;

Precautions for automobile quick connectors:

Please use Teflon sealing tape for the external thread of the control thread.

Please do not pressurize when the casing or quick connector is used alone to prevent the valve from flying out.

Please do not use it for purposes other than quick fluid couplings.

Perform a dissolution experiment of the sealing material for the fluid to confirm whether the material is suitable.

For threaded installation, do not exceed the tightening torque during installation to prevent damage.

< /p>

Hydraulic quick couplings are joints in which the material of the female joint is chrome-plated steel, and the lock sleeve of the male joint and the female joint is hardened.

Hydraulic quick couplings are designed for special heavy loads. The material of the female joints is chrome-plated steel. The lock sleeves of the male joints and the female joints are hardened, with good pressure resistance and performance, and use two-stage sealing; no Leakage, with safety self-locking function.

This kind of joint is a kind of joint that does not need to use tools, but also can realize the rapid assembly and disassembly of pipelines. It has two ends open and close type and two ends open type. Kind of structure.

The hydraulic quick pipe joint is between the oil pipe and the oil pipe, between the oil pipe and the hydraulic component The detachable connector should meet the requirements of convenient assembly and disassembly, reliable connection, reliable sealing, small size, large oil flow capacity, small pressure loss, and good processing technology.

According to the connection method of the oil pipe and the pipe joint, the pipe joints are mainly in the form of flat sealing type, ferrule sealing type, and flaring sealing type.

Hydraulic Precautions for the use of quick connectors:

1. Please use sealing materials for external threads with controlled threads.

2. Don't hit, bend, stretch, and prevent damage.

3. Please do not use it for fluids other than applicable fluids.

4. Please do not use it for purposes other than quick connectors.

5. Do not connect with quick fluid couplings made by other companies.

I believe everyone is familiar with quick couplings. Now Baixin introduces several ways to wash it. Because it has been left in the air for a long time, it will inevitably be contaminated with dust or dirt. At this time, we can wash with soap or warm water. If it is the surface of the trademark, we will use a weak lotion and warm water to rinse. If it is contaminated by grease, etc., we should wipe it with a soft cloth and then clean it with detergent.

< /p>

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...