Stainless steel quick couplings are reasonably priced, Liyuan Tianjin

by:Haikuo     2021-06-20

The cost of KZF hydraulic quick couplings is relative to that of ordinary hydraulic couplings Higher, but the convenience it brings far exceeds the price difference between them.

Why use quick connectors?

● Time-saving and labor-saving: The oil circuit is disconnected and connected through the quick connector, which is simple in action and saves time and manpower.

●Fuel saving: When the oil circuit is broken, the single valve on the quick connector can close the oil circuit so that the oil will not flow out and avoid oil and oil Pressure loss.

●Space-saving: Various types to meet any pipe layout needs.

●Environmental protection: When the quick connector is disconnected and connected, the oil will not spill and protect the environment.

Large equipment or large hydraulic systems are composed of many parts and components. When a project is over, construction machinery and equipment need to rush to the next project It often needs to be transported separately, because several large trailers cannot be installed, and the overall transportation cannot be realized, and the cost will be high. Therefore, it needs to be disassembled and assembled on site, and then transported. The only thing that can guarantee this kind of quick connection and the safety of the system is the hydraulic quick coupling.

< /p>

Note

Please do not use it for purposes other than quick fluid couplings.

Put the hose firmly into the root of the interface and fix it with a hose belt or nut.

In order to prevent the possession of moisture, it should be stored indoors.

Do not use cracked hoses to prevent leakage and falling off.

Before use, carry out a leak check. If there is a leak, stop using it immediately and replace it with a new one.

Make sure that the gas welding gun valve is closed before connecting.

Do not use water or glycol series media for steel and iron quick couplings. The zinc coating on the surface will dissolve.

The fluid used is a clean fluid filtered by a filter.

The 'O' seal must always be kept with oil when used.

Refer to the end of this note to confirm the sealing material and body material suitable for the use of fluids.

< /p>

The main advantages of KZF quick couplings are as follows:

• KZF quick couplings are easier to clean and help reduce pollution to the entire hydraulic system.

• Ensure the leakage during disassembly and docking, and reduce oil loss

• Less air clamping during disassembly and docking Enhance the performance of the entire hydraulic system

• The internal design of the KZF quick connector reduces the pressure and improves the efficiency of the entire system

• Modular design allows more flexible interface configuration

• Tolerate pulse pressure

• Compact structure

• Simple and safe to use

Clean the docking interface before docking to avoid Contaminants enter the hydraulic circuit

• When docking, push one end of the male connector into the female connector and vice versa

• After docking, please rotate the outer lock sleeve to the locked position to prevent Things when disconnected

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...