The anti-static hose is made by adding anti-static materials during its manufacturing process to achieve anti-static effect

by:Haikuo     2021-05-31
Anti-static hoses, wear-resistant anti-static hoses, and anti-static suction hoses are grounded through steel wire and other methods to eliminate static electricity generated during the hose conveying process, so as to achieve smoother conveying of materials. The inner wall is smooth, medium-sized, reinforced with steel wire, and can be drained of electrostatic polyester polyurethane (ESTER PU) hose, with copper-plated plastic-coated steel wire spiral reinforcement, and the inner wall is smooth to ensure smooth flow of materials in the tube. It conforms to TRB 3 2153 Electrostatic standards.
   Wear-resistant and anti-static hoses are made with certain anti-static materials or static discharge agents, such as anti-static wires, to achieve anti-static effects. It can be used for suction with static electricity, and can eliminate static electricity caused by friction. It is dedicated to abrasive solids, such as dust, powder, fiber debris and granular materials; it can also be used for gaseous and liquid media, industrial dust removal and suction . As an anti-wear and anti-static protection tube.

   Anti-static hose is mainly used in high flow rate, high abrasive solids such as powder, (aluminum powder, zinc powder, copper powder, magnesium powder that is easy to accumulate due to static electricity), coal; feed (such as blood powder, Fish meal), chips and fine particles, gas and liquid environments, industrial vacuum cleaners, granular transport systems, printing machines, air blowers and compressors, as strong protective tubes, anti-wear, conductive grade extraction and transportation Tube, surface impedance <10 to the 8th power, heavy, smooth, internal.
  Properties: The tube wall itself can conduct electricity, pressurization and vacuum resistance, very smooth material, good chemical resistance, very strong, the bending radius is approximately equal to the outer diameter, electrical and surface impedance ≤10∧8, in line with European ATEX According to the regulations, it meets the ISO8031 standard and can discharge static electricity (according to BGR-132, firmerly ZH1/200). It is very suitable for the production environment that needs permanent static discharge. Achieve full colloidal anti-static, prevent explosion and explosion hazard.
  Temperature range: -40℃~125℃ (up to +150℃ in a short time)
   structure: smooth inner wall, transparent tube wall, spiral reinforcement on the outside; wall: top platinum silica gel; spiral reinforcement on the outside structure; very smooth characteristics, acid and alkali resistance, chemical resistance, bending radius approximately equal to the outer diameter.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...