The card sleeve connector manufacturer gives you a good suggestion 'online consultation'
The maintenance method of card sleeve joint is as follows:
1. Periodically check the tightness of the ferrule joints, through the drain nozzle to check, if there is internal leakage, follow the internal leakage treatment procedures to deal with;
Sleeve joint manufacturer gives you a good suggestion 'online consultation' [Liyuan wjnchlm]
2. Inject a certain amount of fresh grease into the ferrule connector seat in a timely manner, and the amount and frequency of injection are in accordance with the ferrule The frequency of the joint activity depends on the frequency of the joint. Generally, after the ferrule joint is moved once, an appropriate amount of grease should be injected, and the amount of each injection is about 1/8 of the volume of the sealing system.
3. Carry out the maintenance and maintenance of the ferrule joint before the winter. The key point is to drain the water in the ferrule joint cavity and the actuator, which will affect the normal function;p>
4. For ferrule joints that rarely move, do less activity once a year and inject an appropriate amount of grease at the same time. This can prevent the ball and the ferrule joint seat from being glued and protect the ferrule Joint seat and ball.
Card Sleeve joints are used in many levels. In the whole process of applying high-temperature fans, proper installation of ferrule joints is very important. The following is a detailed introduction to the parts of ferrule joints.
Applicable to ferrule joints, chemical plants, metallurgy, pharmaceutical industry, instrumentation equipment, mechanical equipment manufacturing, electric power enterprises. It is a spherical method, and the selection angle of the ferrule type joint has double-run airtightness. The key part of the ferrule joint is the ferrule type joint, which is a circular diagram of metal material with a knife edge developed at the front end. Simple structure, reliable sealing characteristics, convenient use, exquisite manufacturing, light and beautiful appearance design. No need to add a seal ring, no need to weld, save raw materials, continuous assembly and disassembly characteristics are good