The difference between stainless steel corrugated pipe and corrugated hose?

by:Haikuo     2021-06-20
What is recommended for everyone today is the introduction of corrugated hose, so what is corrugated hose? Corrugated hose actually refers to two products, namely corrugated pipe and hose, then what is the difference between them? Six points and four How to distinguish the different corrugated hoses? The knowledge of these three aspects is recommended for everyone today. From this, we can know that common corrugated hoses are installed and selected for machine tools, machinery, electrical equipment, etc. They can be classified according to materials, but suitable and reasonable corrugated hoses have good flexibility and corrosion resistance, and integrate corrugations. For the performance of the respective advantages of tube and soft, please refer to the following for understanding and analysis before purchase.
One, what is the corrugated hose
Corrugated hose is installed in the liquid conveying system as a kind of flexible pressure-resistant pipe to compensate for the mutual displacement of the pipes or the connecting ends of machines and equipment, absorb vibration energy, and can play the role of vibration reduction and noise reduction. It has good flexibility , Light weight, corrosion resistance, fatigue resistance, high and low temperature resistance and many other features. It can also be threaded. It can withstand the heavy pressure of footsteps without breaking or deforming, and can recover quickly without any damage.
It can be used for machine tools, electrical equipment, food machinery, automation equipment, motors, air conditioners, refrigerators, automobile wiring harnesses, and protect wires and cables from external wear and insulation.
Second, what is the difference between the bellows hose?
The difference between bellows and hoses is:
The wave height is not the same as the wave distance. The corrugated pipe compensator is used to absorb the thermal deformation of the pipe. The hose is used to absorb vibration by bending (the stainless steel corrugated metal hose has no rubber in it).
The hose, made of 304 stainless steel or 301 stainless steel, is used as a wire and cable protection tube for wires, cables, and automatic instrument signals. The specifications are from 3mm to 150mm. The ultra-small diameter stainless steel hose (inner diameter 3mm-25mm) is mainly used for the protection of the sensing circuit of the precision optical ruler and the protection of the industrial sensor circuit. It has good flexibility, corrosion resistance, high temperature resistance, abrasion resistance, and tensile resistance.
How to distinguish three, 6 points and 4 points corrugated hose?
The 4 in charge and the 6 in charge are obviously visible from the pipe diameter, the 6 in charge is larger than the 4 in charge, but from the perspective of decoration, the 4 in charge and the 6 in charge play both roles It's the same. Many renovation owners always think that the larger the pipe diameter, the better. In fact, this is not the case. I will give you an analysis of the truth. The faucets we use are all 4 points, which means that when you use 6 points, What comes out of the faucet is still the size of 4 in charge. It depends on the size. The thickness is different. The diameter of the tube center circle depends on the thickness. The health factor is a unit converted according to the original 1 inch. The inner diameter of 4 inches is about 13.2 mm, and 6 inches is 19.8 mm. A 6 inch tube is larger than a 4 inch tube. The diameter of the center of the circle depends on your need for water flow. The diameter of 6 points is 1.6cm, and the diameter of 4 points is 1.2cm. It can be distinguished by the thickness. The diameter of the 4-point water pipe is 20mm and the diameter of the 6-point water pipe is 25mm. General heating The 6 points used are slightly thicker. The tap water pipe is thin 4 points.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...