There are many types of ventilation ducts, among which, what are the performance characteristics and applications of the high-temperature 500-degree telescopic duct?

by:Haikuo     2021-06-02
There are many types of ventilation ducts, among which, what are the performance characteristics and applications of the high-temperature 500-degree telescopic duct?
   There are many types of ventilation pipes, and the commonly used ones are basically ordinary ventilation pipes, such as high temperature resistant 500 degrees telescopic ventilation hoses, which are used in some special occasions. This kind of ventilation duct is well-known for its high temperature resistance. In addition, what other excellent properties are there? Under what circumstances will it be used?
  The high temperature resistant ventilation hose is divided into two parts, which is composed of an outer surface and an inner tube. Its outer surface is made of stainless steel ring structure, wear-resistant negative pressure, and fire-resistant Kevlar materials. It is precisely because the outer layer of the high temperature resistant ventilation hose is protected by a strong steel ring, that it can be dragged on the ground at will without wearing the air pipe, bearing the heavy pressure of the object, and achieving fireproof, waterproof, acid and alkali resistance. Very cost-effective.
  High temperature resistant air duct can be arbitrarily stretched and bent, freely connected, light in size, easy to carry, high temperature resistant, acid and alkali resistant, flame retardant, insulation and other characteristics, high temperature resistant ventilation hoses are often used as exhaust gas pipes. It is widely used in engine exhaust gas extraction; dust and fiber and other abrasive solids; steam and smoke and other active gases. The following editor from Hangzhou Haikuo will introduce to you one of the most widely used high-temperature 500-degree telescopic ducts on the market.

  Application: 500 degree high temperature telescopic air duct is especially suitable for hoses that require flame retardancy, suitable for solids such as dust and fibers, gaseous media such as steam and smoke, factory vacuuming and dust removal, exhaust gas emission, blower exhaust gas emission and welding Air emissions.
  Properties: good heat resistance, high elasticity and compression ratio of 3:1, external spiral wire is used for wear protection, external steel wire tightly clamps the pipe wall, small bending radius, not easy to kink, flame retardant According to: DIN 4102-B1.
   Structure: Patented CP structure (CP is the abbreviation of clamp profile), external spiral metal wire support (metal sheet + wire) tube wall.
  Raw material: pipe wall material: stainless steel spiral wire reinforcement, special glass fiber coating, spiral wire: galvanized steel.
  Temperature range: about -60 °C to +500 °C, it can reach +550 °C in a short time
   structure: patented CP structure, external spiral metal wire support (metal sheet + wire), double wall;
   Both ends of the hose are equipped with a low-carbon steel ring or stainless steel clamps, zippers and other ways to connect, which is convenient and fast; it can extend the length of the duct indefinitely and simply connect with the ventilator, which is convenient and practical for customers to use The length is not limited.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...