What are the specifications of Lex Industrial Vacuum Hose, and how to choose the right vacuum hose?
Steel wire suction pipe is an industrial hose with an additional reinforced structure. This structure makes the hose have strong compression and wear resistance, tensile resistance, strong tension, high tear strength, and flexural resistance , Penetration resistance, low temperature resistance, hydrolysis resistance and other properties, and has good resilience and long service life. Highly resistant to wear, more than 10 times more wear-resistant than general PVC hoses, rubber pipes, wine pipes, and sanitary hoses. It is especially suitable for the transportation of dust, powder, fiber, debris and particles, and can withstand high flow rates. There will be no wear due to the friction of abrasive sand and gravel.
Hangzhou Haikuo Industrial Vacuum Hose has complete specifications and models to meet most industrial needs.
For vacuum hoses, the specifications here do not only refer to the inner and outer diameters, but more often refer to the tube wall thickness of the tube. Commonly used thickness specifications are: 0.4mm, 0.6mm, 0.9mm , 1.5mm, 2.0mm, etc., in addition to the thickness of the pipe wall, there are also the inner diameter of the pipe. The inner diameter is generally between 20mm and 500mm. The length of the pipe is generally 10 meters, 15 meters, and 20 meters.
steel wire vacuum hose, industrial vacuum hose is completely covered with copper-plated steel wire on the pipe wall, which can better meet the transportation requirements of various industries, and is covered with strong and elastic copper-plated steel wire on the pipe wall ; Pipe wall: high-quality polyester-polyurethane, with high expansion strength and tear strength, wear resistance (2.5 to 5 times higher than most rubber materials, 3 to 4 times higher than soft PVC), good resistance to minerals Oil and gasoline performance, good chemical resistance, UV resistance and ozone resistance.
How to choose the right industrial vacuum hose? When choosing, you can choose from the conventional industry. For example, you can choose 0.4mm or 0.6mm thick pipe for woodworking vacuum hose, and 0.9mm thick pipe for drilling machine vacuum hose. Choose 1.5mm thick tube for the ventilation hose of the printer, 2.0mm thick tube for the sweeper vacuum tube, etc. If it is not a conventional industry, you can choose according to the conveyed medium, some fine powder or low pressure environment Use the tube with a thinner wall, and choose a thicker tube for some high-pressure or coarse particles.