What is the market prospect of one-piece hose joints?
The result of flexible rubber joints becoming acid and alkali resistant rubber joints
Flexible rubber soft joints become the result of acid and alkali resistant rubber joints. Rubber joints are composed of inner and outer layers of rubber, plies and metal wire loops to form tubular rubber parts, which are vulcanized and molded, and then combined with metal flanges or loose sleeves of parallel joints. This product can reduce vibration and noise, and can compensate for thermal expansion and contraction caused by temperature changes, and has been widely used in various vibration damping accessory systems. The practicality of acid and alkali resistant rubber joints is actually very high. However, due to the high temperature of acid and alkali, in addition to acid and alkali resistance, rubber joints must also have high temperature resistance, while ordinary rubber joints can only withstand a medium of about 80 degrees.
The consequences of posing as oil-resistant rubber joints
The consequences of posing as oil-resistant rubber joints with ordinary rubber joints. This combination is only suitable for manufacturers who use it for a short time, and the emergency interface should not exceed 1 month. Otherwise, the rubber joints will age in advance, and cracks will slowly appear, this is just the beginning. If it is not replaced, the rubber joint will not be able to withstand long-term oil soaking, and various abnormal conditions will occur, which will cause the rubber joint to fail to work normally. The consequences of ordinary rubber joints pretending to be acid and alkali resistant rubber joints. The practicality of acid and alkali resistant rubber joints is actually very high. However, due to the high temperature of acid and alkali, in addition to acid and alkali resistance, acid and alkali resistant rubber joints also need to have high temperature resistance, while ordinary rubber joints can only withstand a medium of about 80°C.
The leakage of the liquefied gas quick connector will cause poor equipment and affect the quality
The leak of the liquefied gas quick connector will cause the equipment to deteriorate and affect the quality. Production, high quality and low cost are requirements for continuous production. At present, many liquefied gas quick coupling products are unreliable and have a short service life. Some leaks will soon be used. Therefore, the maintenance personnel of liquefied gas quick couplings must control the quality during production. In addition, due to the liquefied gas quick connector, a large number of leaks in the system led to poor equipment, which brought great difficulties to on-site operations and seriously affected the normal operation of production. From the field point of view, most of the leaked liquefied gas quick connectors leaked through the inside of the guide roller bearing housing, and a small amount of leakage leaked from the rear opening of the bearing housing.
What matters should be paid attention to during the use of liquefied gas quick couplings?
1. Please do not use it for purposes other than conveying media.
2. Please do not use it for fluids other than the applicable fluid.
3. Do not exceed the pressure when using it.
4. Don't use it outside the operating temperature range to prevent deformation of the sealing material, which may easily lead to leakage.
5. Do not perform damage.
The birth of liquefied petroleum gas quick connector products makes human life more convenient and is deeply loved by people. But nowadays, there are many manufacturers that produce products, so you need to fully understand them when you buy them.