Withholding pipe joint service is assured and reliable 'multiple pictures'

by:Haikuo     2021-06-13

The way the metal soft joint is connected to the pipeline

>

The ways of connecting soft metal joints and pipes are divided into: flange connection, welding, threaded connection, quick joint connection, small diameter metal soft connection generally uses threaded and quick joint connection, larger diameter generally uses method Lan connection and welding connection. This product has good flexibility, corrosion resistance, high temperature resistance, abrasion resistance, tensile resistance, water resistance and provides excellent electromagnetic shielding performance. The soft metal joint can be freely bent into various angles and radii of curvature, and has the same flexibility and durability in all directions. The pitches are flexible, with good flexibility, without blocking and stiffness.

Features of stainless steel quick couplings:

Features of stainless steel quick couplings: 01 Time-saving and labor-saving: action when disconnecting and connecting the oil circuit through quick couplings Simple, save time and manpower. 02 Fuel saving: When the oil circuit is broken, the single valve on the quick connector can close the oil circuit, so that the oil will not flow out, and the oil pressure loss of the oil can be avoided. 03 Environmental protection: When the quick connector is broken and connected, the oil will not spill and protect the environment. 04 Equipment design, easy to transport: large equipment or hydraulic tools that need to be easily carried, use quick connectors to disassemble and transport, and then assemble and use after reaching the destination. 05 Economy: All the above advantages have created economic value for customers.

Precautions for the use of quick couplings

Precautions for the use of quick couplings: 1. Never install quick couplings under pressure And take off because this is extremely dangerous behavior. 2. It is difficult to connect if there is residual pressure in the quick connector. To remove the residual pressure, please do not hit the front end of the valve with a hammer or other objects, because this is extremely dangerous. 3. If foreign matter is mixed into the fluid used, it will cause joint failure. Therefore, the fluid must be used after passing through the filter. 4. If the wrong sealing material is selected, the joint will leak. Please confirm the sealing material suitable for the fluid type and temperature before selecting it.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...